Ernest Shaw <ernest_s@...>
toggle quoted messageShow quoted text
I think you are just down the way from me. I am surprised you couldn’t hear my ill conceived ramblings on phone.
Jim Et al,
I can confirm what Jim reported. I was able to pull his call out on CW, but that was about all. Er… FLDIGI did at least. (I don’t have a key yet so I couldn’t attempt a CW response) I could hear that he was in there on phone, but couldn’t
pull him out of the noise. W0TES and W0ZH I could copy, my QTH is just south to Green Meadows making them both just over the ridge from me here, so that is not terribly supprising.
I suspect that my noise level is high here, as my house is right next to the power lines. I don’t have my log in front of me, but I seem to recall about S5 on noise.
For antenna, I just used my MFJ 80m EFHW. I have the ground lug on the feed point grounded to earth with a couple of grounding rods. It tunes on 10 m, but like most things EFHW I have to wonder how much I am actually how efficient it really
is. If there is any interest in continuing this activity going forward, I would gladly cut a 10m dipole and hang it up in the attic, or even possibly look into construction of a vertical with some radials. I am not in a great position to put a 10 m vertical
up with much elevation.
I will also work on getting acquiring a key. I don’t expect to be able to commit sufficient time to CW to fully learn it, but I might be able to at least bang out a callsign or two at a low WPM.
This is really exciting to play with. Please keep up the excellent work!
On Sep 21, 2018, at 8:43 PM, James Whitehill <whitehill@...
Jon, thanks for the test effort. You are not more than 4-5 miles away from me and maybe half that from Tim, W0TES. Maybe the ground wave skipped over you. I'll try to setup another test, with more warning and time for folks to set up. This time we will
use 76 machine for liaison, as WD6BGN suggested. BTW Ralph heard my SSB signal down in the noise during the test. He's 28 mi. away.
Jim and All,
I listened on 10m but didn’t hear a peep at my place. I’m guessing my antenna is just too low relative to the local terrain.
Jon Cole, N0OFJ
On Sep 21, 2018, at 4:49 PM, James Whitehill <whitehill@...
The 10 meter test was cooked up over last Wednesday's (9/19) Hyvee lunch meeting and announced by me on the CMRA net at 9:00 p.m., in terms of time and frequency, as well as the purpose. The time of
the test was right after the CMRA net closed and the frequency was 28.325 mHz, so CW and SSB could be tested, mainly in terms of the range of reception from my QTH just west of Pierpont. I started transmission in cw with the mss. in Morse of "V V V de N0SSM"
sent twice and ending with "AR K". No one replied with cw that I could hear, so I switched to SSB. In order of signal strength: W0TES was the big signal, then W0ZH, and finally KC0EZE. I heard no one else. But WD6BGN reported hearing my cw, and his QTH
in Clark is approx. 28 mi. to the north. I was transmitting with 100w. into a good vertical on my hill.
The purpose was to find out how and if 10 meters could serve during darkness as a place for a local cw practice net, especially for cw learners and slow fists. The first question was the range of reception,
in terms of direction and strength. The evidence after this "test" is indefinite. Clearly, my SSB signal reached out only 2.8 miles, to Ernest in south Columbia. My impression is that those who participated scrambled to get their antennas up and working
for 10 meters!
I would like to run a further test in the near future, with a proper, pre-published plan, to encourage more folks to listen in on 10 meters and report the possible range using ground wave.
My guess is that 10 meters can reach out much further than line of site with its ground wave alone. That would allow it to be a backup to 2 meters if the 2 meter repeater went down for whatever reason.
But my primary goal is to get a cw net going locally to help hams interested in learning, improving, or showing off their cw skills. Technician licensees can usually get on 28 mHZ, because antennas
are small, if they have a HF rig. The other option, possibly, for a local cw practice net may be using the 2 meter repeater, and sending cw tones via FM.
Thanks to Tim, Myron, Ernest and Ralph for listening, responding, and reporting last Wednesday!
CAUTION: This email originated from outside of Stephens College.
I am in Springfield, Mo for my dad's surgery. Contact Jim Whitehill for details; he led the exercise.
Sent from my Sprint Samsung Galaxy S7 edge.
-------- Original message --------
Date: 9/20/18 7:12 AM (GMT-06:00)
Subject: Re: [CMRA] 10m Net testing, tonight, Sept 19, 2018, 9:30-10:00pm CST, Report from W0TES.
I must have missed a stitch somewhere. Tell me more about testing on 10
On 09/19/2018 11:40 PM, Tim Spurgeon wrote:
> Thanks to all who participated; sorry I could not hear you, Ralph. It has taken me about 30 minutes to get my car and all equipment pulled in the garage and put away. I wanted to write up a report before I forget, as follows:
> Thanks to Jim for pulling this together tonight.
> My equipment: Kenwood TS-2000 radio, 100 watts, through an Alpha antenna, Model: EZ Military vertical, 6-80 meters, (I did not use the counterpoise or ground on radio) mounted on a section of 10 ft TV antenna pole. I had to quickly relearn button settings
and finally was able to switch back and forth, between CW-AM and Voice-USB/FM on 28.325 MHz. I did not hear Jim (N0SSM) on CW the first time, but first heard him on Voice-USB/FM. I did not hear anyone answer back, so I replied; I think we made first contact
tonight. I could hear Jim, Earnest, Myron, Roy, although I did not have a conversation with Roy. Wow, was I impressed with the relative signal strength of CW from Jim's transmission.
> While we were talking, sorry I did not use your call signs. In my hast to get set up, I did not have a pen to write anything down.
> My take on tonight's experiment: A good first start; let's try several more times, and I challenge everyone who participates to start maximizing there equipment (for example, elevate antennas, change antennas, etc.). If you do not have a paddle, buy one
and learn some minor CW phrases, so we can all try out CW. Jim, Roy, and John, you can help us in this, where anyone who wants to try this out learns to receive and send some simple CW phrases. But, let's not write off 10 meters yet. What say you?
> >From Ralph (WD6BGN), he wrote the following:
> I guess nobody heard me.
> I heard Jim on CW just fine. I also copied Jim, you, and Roy on SSB.
> I had issues getting a key to work. Old corrode d contacts. I was also on the folded dipole, about one or two S units down from the windom.
> Please fwd to Jim and all, thanks
> Dit dit
> Ralph Howard
> ARRL EC Howard
> Sent from LG Pad.
> Tim E. Spurgeon