I have to look in some totes but I think I actually have that Grounding book.

That's good news, William. Willam was an enthusiastic and successful member of the Tech class taught by Myron and I in autumn of 2017 William, I'll leave it to others for the answers you seek, but

Forgot to say that guying information is in another part of the document. There is also max wind load specs.

See http://www.rohnnet.com/files/2015_Rohn_Full_Catalog.pdf#page=170 For self-supporting Rohn G series. If you are somewhere that needs a permit, the drawings and specs from the manufacturer help a

My in-laws and I are finally putting up a tower. The tower is a Rohn 25G that is 80'. The plan is to bury the 1st half of the 1st section in concrete and the tower will be attached to the building

Hi Ryan, Based on your location from the FCC database, you’ll have a better shot at hitting MJEF than going direct to K0SI-10 due to terrain. A directional antenna might help that some as

I swear I replied to this already but I'm also having trouble. It takes about 5 attempts to completely send/receive. Seems like k0si-10 gives up and doesn't finish the transaction.

I've been trying to reply to the latest post about this but it looks like it's not getting approved. I'm still having trouble connecting to winlink on K0SI-10. It seems like it gives up after a bit

It took me 4 tries to get it to work, I tried direct twice, I tried through MMJY, and finally through MJEF and it finally sent my test message

Thanks John for the hard work!!! 73 Brian ADØUK

Thanks, John! - Best Regards, Gary D Vaught We can engineer a solution to nearly any problem you can accurately define. - somewhat anonymous -- 73 W9TIG Gary Vaught

At our CMRA meeting earlier this month Brian (AD0UK) announced a former club member sent electronic copies of a number of newsletters from past years. Brian passed them along to me, and they're now on

Bill Thanks. I'll give it another try this afternoon. 73 Fred AE0FD At 09:45 AM 8/25/2020, you wrote:

Thanks Fred, Can't explain this one. It worked for me. When I went remote to the node I saw that you had connected, but couldnot tell why you had trouble. It worked for me even going through MJEF

Hi This morning it says: *** Starting to call K0SI-10 *** Opening serial port COM6; 9600 baud; Kantronics *** Connecting to K0SI-10 *** Disconnecting due to timeout 73 Fred AE0FD

Thank you for the heads up on Ttree closing. I haven’t been in that store for over ten years.

Hi From a conversation with one of the owners in a checkout line at Westlakes I found out that Tyree hardware is closing. They have a mix of stock unlike Ace or Lowes or Home Depot. If you need

I just thought this would be a good thing to bring up for today. https://nationaldaycalendar.com/national-radio-day-august-20/ -- 73 W9TIG Gary Vaught

I will be there. 73, Jonathan Williams President | ADØZE mobile: (573)514-5773 email: ad0ze@... This email and any files transmitted with it are confidential and intended solely for the use

Jon Thanks for the reminder. I'll be there. 73 Fred AE0FD