|
Re: K0SI-10 down
Fred,
OK. Maybe we clashed, since I was just trying it too :)
Let me know of discrepancies. Should be good now for a while.
bill
--
Bill N0AXZ
Fred,
OK. Maybe we clashed, since I was just trying it too :)
Let me know of discrepancies. Should be good now for a while.
bill
--
Bill N0AXZ
|
By
Bill McFarland - N0AXZ
·
#3681
·
|
|
Re: K0SI-10 down
Bill
I just tried it twice, The first time failed but then the second tryworked correctly.
73
Fred AE0FD
At 10:03 AM 2/14/2020, you wrote:
Bill
I just tried it twice, The first time failed but then the second tryworked correctly.
73
Fred AE0FD
At 10:03 AM 2/14/2020, you wrote:
|
By
Fred Dittrich
·
#3680
·
|
|
Good reading
from 08 Jul 2019 | 12:05 GMTIs Ham Radio a Hobby, a Utility…or Both? A Battle Over Spectrum Heats UpSome think automated radio emails are mucking up the spectrum reserved for amateur radio, while
from 08 Jul 2019 | 12:05 GMTIs Ham Radio a Hobby, a Utility…or Both? A Battle Over Spectrum Heats UpSome think automated radio emails are mucking up the spectrum reserved for amateur radio, while
|
By
kc0pah
·
#3679
·
|
|
Re: K0SI-10 down
Couldn’t tell what happened sometime after 4:00 yesterday afternoon. Was not the cable disconnected but the computer thought it was. REBOOT!
K0SI-10 back on the air.
Bill
--
Bill
Couldn’t tell what happened sometime after 4:00 yesterday afternoon. Was not the cable disconnected but the computer thought it was. REBOOT!
K0SI-10 back on the air.
Bill
--
Bill
|
By
Bill McFarland - N0AXZ
·
#3678
·
|
|
Re: K0SI-10 down
thought I fixed it yesterday, but now again the computer is not seeing the TNC. Yesterday the USB cable had come out. Will see what it is today!
bill
--
Bill N0AXZ
thought I fixed it yesterday, but now again the computer is not seeing the TNC. Yesterday the USB cable had come out. Will see what it is today!
bill
--
Bill N0AXZ
|
By
Bill McFarland - N0AXZ
·
#3677
·
|
|
K0SI-10 down
Hi
RMSExpress says:
*** Starting to call K0SI-10
*** Opening serial port COM9; 9600 baud; Kantronics
*** Connecting to K0SI-10
*** CONNECTED TO K0SI-10
73
Fred AE0FD
Hi
RMSExpress says:
*** Starting to call K0SI-10
*** Opening serial port COM9; 9600 baud; Kantronics
*** Connecting to K0SI-10
*** CONNECTED TO K0SI-10
73
Fred AE0FD
|
By
Fred Dittrich
·
#3676
·
|
|
Element 4 study
Hi
amateurlogic.tv is starting to go through the Extra exam questions. Since they go through a few questions per week this will give you time to research each set of questions for a week before the
Hi
amateurlogic.tv is starting to go through the Extra exam questions. Since they go through a few questions per week this will give you time to research each set of questions for a week before the
|
By
Fred Dittrich
·
#3675
·
|
|
Re: RE club projector
Also usefull to use a Raspberry Pi on a VGA moniter.
I have the dongle type, but this adapter just mounts to the VGA socket, i bit cleaner I think.
73
Ralph Howard
WD6BGN
Also usefull to use a Raspberry Pi on a VGA moniter.
I have the dongle type, but this adapter just mounts to the VGA socket, i bit cleaner I think.
73
Ralph Howard
WD6BGN
|
By
Ralph Howard
·
#3674
·
|
|
Re: RE club projector
Thanks Fred,
I'll just have a spare now :)
bill
--
Bill N0AXZ
Thanks Fred,
I'll just have a spare now :)
bill
--
Bill N0AXZ
|
By
Bill McFarland - N0AXZ
·
#3673
·
|
|
RE club projector
Hi
FYI, when I gave the January presentation I bought an HDMI-DVI adapter cable and stuck it in the side pocket of the projector for everyone's use.
73
Fred AE0FD
Hi
FYI, when I gave the January presentation I bought an HDMI-DVI adapter cable and stuck it in the side pocket of the projector for everyone's use.
73
Fred AE0FD
|
By
Fred Dittrich
·
#3672
·
|
|
Re: Update to Links of Interest Page at k0si.net
Thanks, Bill. Truthfully, if I were more diligent, I'd have done this sooner. I only thought of adding podcast links recently, and I figured that might be helpful for our newer hams. I'll add the new
Thanks, Bill. Truthfully, if I were more diligent, I'd have done this sooner. I only thought of adding podcast links recently, and I figured that might be helpful for our newer hams. I'll add the new
|
By
John W. Smith
·
#3671
·
|
|
Re: Update to Links of Interest Page at k0si.net
John,
Good job keeping us going on the web.
Thanks,
bill
--
Bill N0AXZ
John,
Good job keeping us going on the web.
Thanks,
bill
--
Bill N0AXZ
|
By
Bill McFarland - N0AXZ
·
#3670
·
|
|
Update to Links of Interest Page at k0si.net
I've updated the Links of Interest page on our club site by putting a category near the bottom of the page for podcasts & videos. I thought that might be of interest for new/recent hams in addition to
I've updated the Links of Interest page on our club site by putting a category near the bottom of the page for podcasts & videos. I thought that might be of interest for new/recent hams in addition to
|
By
John W. Smith
·
#3669
·
|
|
Re: [bcares] *** Please Read *** BCARES Feburary Meeting
Good idea.
I was not going to come tonight on account of the WX.
Cheers!
Ralph Howard
WD6BGN
Good idea.
I was not going to come tonight on account of the WX.
Cheers!
Ralph Howard
WD6BGN
|
By
Ralph Howard
·
#3668
·
|
|
*** Please Read *** BCARES Feburary Meeting
All,
Due to the predicted weather and the current conditions tonight's BCARES meeting at the EOC is CANCELED.
Elections that were going to be voted on tonight and the "Winlink and Beyond"
All,
Due to the predicted weather and the current conditions tonight's BCARES meeting at the EOC is CANCELED.
Elections that were going to be voted on tonight and the "Winlink and Beyond"
|
By
Big Jon
·
#3667
·
|
|
Re: Help with setting up DMR anytone AT-D878UV Radio non bluetooth
Brian
I think you should hold a little class.
Scott
Brian
I think you should hold a little class.
Scott
|
By
Scott Vince
·
#3666
·
|
|
Help with setting up DMR anytone AT-D878UV Radio non bluetooth
Hi its KE0SWO, I just got my radio this week. I havent had time to really dive into it all due to being busy an working all the time an no veicheal at the moment due to work being done on it... so I
Hi its KE0SWO, I just got my radio this week. I havent had time to really dive into it all due to being busy an working all the time an no veicheal at the moment due to work being done on it... so I
|
By
Cody
·
#3665
·
|
|
January Meeting Minutes Posted
The minutes for the January meeting are posted at https://k0si.net/cmra-meeting-minutes/ . Click January for 2020 to view or download.
73,
John, KC0HSB
--
This message came to you from
John
The minutes for the January meeting are posted at https://k0si.net/cmra-meeting-minutes/ . Click January for 2020 to view or download.
73,
John, KC0HSB
--
This message came to you from
John
|
By
John W. Smith
·
#3664
·
|
|
Re: Florida Winlink Net Check-in
Jim,
I forgot.
Will try this Monday.
Bill N0AXZ
--
Bill N0AXZ
Jim,
I forgot.
Will try this Monday.
Bill N0AXZ
--
Bill N0AXZ
|
By
Bill McFarland - N0AXZ
·
#3663
·
|
|
Re: Florida Winlink Net Check-in
They added a new section to the Florida Winlink Net Check-in report showing how many from each state checked in.
It was pretty lonely for me representing Missouri. I am curious if anyone else tried
They added a new section to the Florida Winlink Net Check-in report showing how many from each state checked in.
It was pretty lonely for me representing Missouri. I am curious if anyone else tried
|
By
Jim Biggerstaff N0TKN
·
#3662
·
|