Date   

New MidMO ARC.Repeater Installed

Jim Biggerstaff N0TKN
 

Our move from the previous Holts Summit Site to Jefferson City proper is complete.  The new repeater was installed Monday and connected to the new tower/feed line/antenna.  Checkins to our regular Wednesday evening net at 8PM are appreciated and since this is a new install, signal reports and your locations are also appreciated.
Thanks and 73,   Jim
N0TKN


Christmas Party for December Meeting

AD0UK
 

Please find attached the invitation for the Annual CMRA Christmas Party 2018 - 

I would like to extend a big THANK YOU to Ellen McKenzie for coordinating this event and look forward to attending and enjoying her hard work!!  Please contact Ellen with your count of who will be attending as soon as possible - Thanks you!!


73

Brian
AD0UK




Re: N0GSG DMR Contact Manager 2.61 Released

Mike Morgan
 


Re: N0GSG DMR Contact Manager 2.61 Released

John Beatty
 

Thanks Corey.   

On Sun, Nov 4, 2018 at 9:24 PM Corey via Groups.Io <kc0yns=yahoo.com@groups.io> wrote:


73  KC0YNS  Corey Mesenbrink
DTS. Digital Traffic System
Missouri Traffic Net 3.963 
AssIstant EC for Boone County


Begin forwarded message:

From: COREY MESENBRINK <kc0yns@...>
Date: November 4, 2018 at 9:16:18 PM CST
To: dig@CMRA.groups.io
Subject: N0GSG DMR Contact Manager 2.61 Released



All,

We have just released N0GSG Contact Manager version 2.61 <http://n0gsg.com/contact-manager/>. N0GSG Contact Manager is the “goto” software for working with codeplug data in many different makes of DMR radios, including Connect Systems, Tytera, AnyTone, and others. It allows you to freely edit information in all supported codeplugs, and also allows you to migrate data freely between any supported radio types using copy and paste commands for individual elements (such as contacts, channels, or zones), or Structural Import for seamlessly migrating complete codeplug structures.

Version 2.61 incorporates support for the new TYT MD-UV380, an enhanced DMR Database Search Facility, and for radios with multi-bank zones, a Mirroring Command to copy between A and B sections of these zones.

Version 2.61 features enhanced Mass Change and Zone Wizard functionality. Within the Mass Change command, you can now specify a custom transmit frequency to account for non-standard repeater splits. In Zone Wizard, you can now tell Contact Manager to divide a large group of related channels into multiple zones - - this feature is quite handy for building zones to cover geographic areas with lots of DMR repeaters and talkgroups.

Radio ID recently upgraded its servers to secure HTTP (HTTPS) - - Version 2.61 is now able to connect with Radio ID to obtain full DMR record information for all but European DMR stations. Version 2.61 continues to merge Radio ID and Ham Digital data so that all DMR records are available.

Within the DMR Online Database Searcher we've also added a new CSV Contact Exporter that will allow you to export properly-formatted CSV contact files for radios such as the MD-2017, MD-9600, and MD-UV380, so that you can load additional contacts (up to 100,000) for these radios.

The documentation <http://n0gsg.com/contact-manager/Contact_Manager.pdf> for Contact Manager is updated and explains how to use the new features.

N0GSG Contact Manager is delivered via secured servers that are scanned daily for malware. Our site and software are 100% safe for your computer (we can make this claim only if you download Contact Manager direct from our site at <http://n0gsg.com/contact-manager/>). It is well known that certain anti-virus software (including Windows Defender) is notorious for delivering false-positive reports. You may view an authoritative scan of this entire site and its content by visiting Virus Total.

Our next update will be addition of new radios to extend the usefulness of Contact Manager to as many users as possible. We welcome your input on this software and very much appreciate your support for the Contact Manager project.

Best,
Tom

--
Tom Wheeler
Amateur Radio Station NØGSG
Overland Park, KS
http://n0gsg.com
tom.n0gsg@...
_______________________________________________
To post a message to all the list members, send email directly to <larrystaples@...>

--


N0GSG DMR Contact Manager 2.61 Released

Corey
 



73  KC0YNS  Corey Mesenbrink
DTS. Digital Traffic System
Missouri Traffic Net 3.963 
AssIstant EC for Boone County


Begin forwarded message:

From: COREY MESENBRINK <kc0yns@...>
Date: November 4, 2018 at 9:16:18 PM CST
To: dig@CMRA.groups.io
Subject: N0GSG DMR Contact Manager 2.61 Released



All,

We have just released N0GSG Contact Manager version 2.61 <http://n0gsg.com/contact-manager/>. N0GSG Contact Manager is the “goto” software for working with codeplug data in many different makes of DMR radios, including Connect Systems, Tytera, AnyTone, and others. It allows you to freely edit information in all supported codeplugs, and also allows you to migrate data freely between any supported radio types using copy and paste commands for individual elements (such as contacts, channels, or zones), or Structural Import for seamlessly migrating complete codeplug structures.

Version 2.61 incorporates support for the new TYT MD-UV380, an enhanced DMR Database Search Facility, and for radios with multi-bank zones, a Mirroring Command to copy between A and B sections of these zones.

Version 2.61 features enhanced Mass Change and Zone Wizard functionality. Within the Mass Change command, you can now specify a custom transmit frequency to account for non-standard repeater splits. In Zone Wizard, you can now tell Contact Manager to divide a large group of related channels into multiple zones - - this feature is quite handy for building zones to cover geographic areas with lots of DMR repeaters and talkgroups.

Radio ID recently upgraded its servers to secure HTTP (HTTPS) - - Version 2.61 is now able to connect with Radio ID to obtain full DMR record information for all but European DMR stations. Version 2.61 continues to merge Radio ID and Ham Digital data so that all DMR records are available.

Within the DMR Online Database Searcher we've also added a new CSV Contact Exporter that will allow you to export properly-formatted CSV contact files for radios such as the MD-2017, MD-9600, and MD-UV380, so that you can load additional contacts (up to 100,000) for these radios.

The documentation <http://n0gsg.com/contact-manager/Contact_Manager.pdf> for Contact Manager is updated and explains how to use the new features.

N0GSG Contact Manager is delivered via secured servers that are scanned daily for malware. Our site and software are 100% safe for your computer (we can make this claim only if you download Contact Manager direct from our site at <http://n0gsg.com/contact-manager/>). It is well known that certain anti-virus software (including Windows Defender) is notorious for delivering false-positive reports. You may view an authoritative scan of this entire site and its content by visiting Virus Total.

Our next update will be addition of new radios to extend the usefulness of Contact Manager to as many users as possible. We welcome your input on this software and very much appreciate your support for the Contact Manager project.

Best,
Tom

--
Tom Wheeler
Amateur Radio Station NØGSG
Overland Park, KS
http://n0gsg.com
tom.n0gsg@...
_______________________________________________
To post a message to all the list members, send email directly to <larrystaples@...>


Fw: Used equipment

AD0UK
 

Oassing this aling if anyine is interested please contact him directly!

73

Brian
AD0UK



Sent from my Verizon, Samsung Galaxy smartphone

-------- Original message --------
From: Bill Fox <wa0wf@...>
Date: 10/27/18 07:25 (GMT-06:00)
To: k0si@...
Subject: Fw: Used equipment



I have some used equipment that I'd like to sell and would appreciate your passing this on to members who might be interested.  The equipment is located at 12182 Fox Estates Lane in Holts Summit.  As I am leaving for Mexico on November 7th I am trying to make someone a good deal.  Equipment follows:

50' Rohn 65 tower, will have to be taken down.
Mosley TA-33 antenna, needs work
HD33 rotator.  I think the meter is bad in the control box
Drake R4-B  with speaker.  Works great but the marker oscillator doesn't seem to work
Ten-Tec Corsair (If  I can find it--haven't yet)  like new.
Globe Scout cw/am xmtr
Heathkit VFO
Heathkit VTVM
SWR meter
Misc small stuff


73,
Bill Fox
wa0wf@...
Phone number 573 295 6431.


RE loop antennas

Fred Dittrich
 

Hi

For everyone interested in loop antennas here is a reference mentioned on this week's Ham Nation: http://alexloop.com/

73

Fred AE0FD


Re: K0SI-10 down this morning

Bill McFarland - N0AXZ
 

Well something is going on. We lost Mediacom NO TV AND NO INTERNET!
Other things as well off today. Bill

On Tue, Oct 23, 2018 at 8:23 AM Fred Dittrich <fdittric@...> wrote:
Bill

It is working for me now.

It's Tuesday, but not Windows update Tuesday - hmmm - odd.

Thanks for checking.

73

Fred AE0FD


At 08:05 AM 10/23/2018, you wrote:
>Fred,
>I didn’t do anything but it is working now from here
>
>Bill
>
> > On Oct 23, 2018, at 7:34 AM, Fred Dittrich <fdittric@...> wrote:
> >
> > Hi
> >
> > After waiting 2-3 minutes for the connection, K0SI-10 says:
> >
> > *** Starting to call K0SI-10
> > *** Opening serial port COM9; 9600 baud; Kantronics
> > *** Connecting to K0SI-10
> > *** CONNECTED TO K0SI-10
> >
> >
> >
> > KM0R-10 is working.
> >
> > 73
> >
> > Fred AE0FD
> >
> >
> >
> >
>
>




--
Bill


Re: K0SI-10 down this morning

Fred Dittrich
 

Bill

It is working for me now.

It's Tuesday, but not Windows update Tuesday - hmmm - odd.

Thanks for checking.

73

Fred AE0FD

At 08:05 AM 10/23/2018, you wrote:
Fred,
I didn’t do anything but it is working now from here

Bill

On Oct 23, 2018, at 7:34 AM, Fred Dittrich <fdittric@...> wrote:

Hi

After waiting 2-3 minutes for the connection, K0SI-10 says:

*** Starting to call K0SI-10
*** Opening serial port COM9; 9600 baud; Kantronics
*** Connecting to K0SI-10
*** CONNECTED TO K0SI-10



KM0R-10 is working.

73

Fred AE0FD




Re: K0SI-10 down this morning

Bill McFarland - N0AXZ
 

Fred,
I didn’t do anything but it is working now from here

Bill

On Oct 23, 2018, at 7:34 AM, Fred Dittrich <fdittric@...> wrote:

Hi

After waiting 2-3 minutes for the connection, K0SI-10 says:

*** Starting to call K0SI-10
*** Opening serial port COM9; 9600 baud; Kantronics
*** Connecting to K0SI-10
*** CONNECTED TO K0SI-10



KM0R-10 is working.

73

Fred AE0FD




K0SI-10 down this morning

Fred Dittrich
 

Hi

After waiting 2-3 minutes for the connection, K0SI-10 says:

*** Starting to call K0SI-10
*** Opening serial port COM9; 9600 baud; Kantronics
*** Connecting to K0SI-10
*** CONNECTED TO K0SI-10



KM0R-10 is working.

73

Fred AE0FD


Re: Para-cord and mast guy doughnuts needed

Corey
 

Good Luck Mike, I check with him years ago about selling that truck. At that time he was very proud & it was way overpriced.... 

73  KC0YNS  Corey Mesenbrink
DTS. Digital Traffic System
Missouri Traffic Net 3.963 
AssIstant EC for Boone County


On Oct 22, 2018, at 11:55 AM, Mike Morgan <cavecritter@...> wrote:

He buys some of his product from Sportsmansguide.



Sent from my Sprint Phone.
-------- Original message --------
From: Gary Vaught - W9TIG <gdv.pops@...>
Date: 10/22/2018 07:17 (GMT-06:00)
Subject: Re: [CMRA] Para-cord and mast guy doughnuts needed

The reason I brought this up is that is the place where I've gotten all of my small quantity paracord purchases for the past several years, and if you get those donuts through surplus shops, they're local.  For now.




Re: Para-cord and mast guy doughnuts needed

Mike Morgan
 

He buys some of his product from Sportsmansguide.



Sent from my Sprint Phone.

-------- Original message --------
From: Gary Vaught - W9TIG <gdv.pops@...>
Date: 10/22/2018 07:17 (GMT-06:00)
To: main@CMRA.groups.io
Subject: Re: [CMRA] Para-cord and mast guy doughnuts needed

The reason I brought this up is that is the place where I've gotten all of my small quantity paracord purchases for the past several years, and if you get those donuts through surplus shops, they're local.  For now.




Re: Para-cord and mast guy doughnuts needed

John Beatty
 

Thanks Fred, Gary.  Fred, I’ll be in touch. 

On Sun, Oct 21, 2018 at 6:24 PM Fred Dittrich <fdittric@...> wrote:
John

I'm sure I have that much of that black dacron if that will do. E-mail me directly and we can work out a good day/time so you can come over and get it.

73

Fred AE0FD


At 05:52 PM 10/21/2018, you wrote:
Hi, I am in need of a "special" mast doughnut for my fiberglass mast, the kind you from from Army surplus, hamfests and on eBay.  I need one but two would be better.   I thought I had one in my parts bin but alas not to be found.  Also I need some para-cord if you have some, 150 feet+ would be about right.  Gladly pay what you want.  Thanks,  John - NO0I

--


Re: Para-cord and mast guy doughnuts needed

Gary Vaught - W9TIG
 

The reason I brought this up is that is the place where I've gotten all of my small quantity paracord purchases for the past several years, and if you get those donuts through surplus shops, they're local. For now.


Re: Para-cord and mast guy doughnuts needed

Mike Morgan
 

Thank you for the information. The truck might be just what is  needed to pull the club response trailer for  hard to get to locations..


From: "Gary Vaught" <gdv.pops@...>
To: "main" <main@cmra.groups.io>
Sent: Monday, October 22, 2018 7:12:12 AM
Subject: Re: [CMRA] Para-cord and mast guy doughnuts needed

Well, it just so happens that my daughter and I were driving past ArmySurplus.net over the weekend and it looks like they're closing down their store.  I haven't checked out their site, but they have big signs in the store windows advertising they're clearing things out.

-
Best Regards,
Gary D Vaught


Re: Para-cord and mast guy doughnuts needed

Gary Vaught - W9TIG
 

Well, it just so happens that my daughter and I were driving past ArmySurplus.net over the weekend and it looks like they're closing down their store.  I haven't checked out their site, but they have big signs in the store windows advertising they're clearing things out.

-
Best Regards,
Gary D Vaught


Re: Para-cord and mast guy doughnuts needed

Fred Dittrich
 

John

I'm sure I have that much of that black dacron if that will do. E-mail me directly and we can work out a good day/time so you can come over and get it.

73

Fred AE0FD


At 05:52 PM 10/21/2018, you wrote:
Hi, I am in need of a "special" mast doughnut for my fiberglass mast, the kind you from from Army surplus, hamfests and on eBay.  I need one but two would be better.   I thought I had one in my parts bin but alas not to be found.  Also I need some para-cord if you have some, 150 feet+ would be about right.  Gladly pay what you want.  Thanks,  John - NO0I


Re: Para-cord and mast guy doughnuts needed

John Beatty
 

Thanks Ralph.  

On Sun, Oct 21, 2018 at 5:52 PM John Beatty <jebeatty@...> wrote:
Hi, I am in need of a "special" mast doughnut for my fiberglass mast, the kind you from from Army surplus, hamfests and on eBay.  I need one but two would be better.   I thought I had one in my parts bin but alas not to be found.  Also I need some para-cord if you have some, 150 feet+ would be about right.  Gladly pay what you want.  Thanks,  John - NO0I

--


Para-cord and mast guy doughnuts needed

John Beatty
 

Hi, I am in need of a "special" mast doughnut for my fiberglass mast, the kind you from from Army surplus, hamfests and on eBay.  I need one but two would be better.   I thought I had one in my parts bin but alas not to be found.  Also I need some para-cord if you have some, 150 feet+ would be about right.  Gladly pay what you want.  Thanks,  John - NO0I

1741 - 1760 of 4732