Date   

Re: This was really great thanks

paul watt
 

James, 
I use a KG-UV9D as my primary HT and they are great radios!  They are durable, easy to program and sound good.  Wouxun has a variety of options for it as well.  I bought mine at the link listed below.  I've owned it for 4 years now and its never let me down.  I would recommend that you buy a good aftermarket dual band antenna for it to fully maximize the radio.  I hope that helps.
Paul KE0IKG

https://www.buytwowayradios.com/consumer/amateur-radios.html



On Mar 24, 2020 07:07, James Wiles <wilesjw@...> wrote:

Being newly Hammed, and looking for a dual band radio,this Baofeng is appealing because I they’re cheap. But I guess you get what you pay for.  I want to make the right choice and not buy junk.  I don’t understand harmonics, but this article explains some of it, and now I’m think or looking at this Wouxun KG-UV9D, please if you have suggestions and where to buy, it would be most appreciated. I don’t have a call sign yet but I go by JW and my email address is wilesjw@...

Thanks





Re: Some Good News - reference.

Tim Spurgeon
 

CMRA and BCARES brothers and sisters:

Gary and Hank asked for references, so here is the one from France. The Fox News articles you can look up on the past few days of Sean Hannity, Tucker Carlson, and Laura Ingraham nightly programs.

The link is as follows; make sure and look at the graph on the last page of the pdf:

https://www.mediterranee-infection.com/wp-content/uploads/2020/03/Hydroxychloroquine_final_DOI_IJAA.pdf

73

Tim (W0TES)
"Expecting the best; prepared for the worst."

********************************************************

----- Original Message -----
From: "Tim & Susan Spurgeon" <tims173@mchsi.com>
To: "main" <main@CMRA.groups.io>, "main" <main@bcares.groups.io>
Sent: Tuesday, March 24, 2020 8:45:33 AM
Subject: Re: [CMRA] Some Good News

CMRA and BCARES brothers and sisters:

Medical Hope is coming -

For the past couple of weeks, I have been watching efforts to find a medical solution to the Wuhan Virus. First
on Youtube, then on the news, then it popped up during the Vice President's daily update, three days ago.

The French started a human trial, more than two weeks ago, and are reporting very positive results. The study
is entitled, "Hydroxychloroquine and Azithromycin (Z-pak) as a treatment of Covid-19: results of an open label
non-randomized clinical trial." The combination of both drugs produces 100 percent cure in five days compared
to a control group that was still testing positive over the same time period. But the fantastic news is that both
drugs are already FDA approved, and President Trump is already having the FDA evaluate this for Wuhan
Virus application. This came up during his press conference, a couple of days ago.

Ten thousand units of this drug have already been sent to New York city, and they begin using it today. We should
start hearing results in about one week.

Hydroxychloroquine has already been used in New Orleans to benefit critical cases, and last night Laura
Ingraham interviewed a doctor that has applied the above mentioned drugs to 350 patients.

Hydroxychloroquine is an anti-malarial drug, developed after WW-II, and it and Azithromycin are cheap,
off patent drugs, whose efficacy and side effects are well know

So, "keep the faith." Good news is coming soon, and we are going to beat this pandemic.

73

Tim (W0TES)


Re: Some Good News

Henry Taylor <hank008@...>
 

Tim,

I need references also.  Would you please "reply all" when you send them ?

Thanks,

Hank

On 3/24/20 9:33 AM, Gary Vaught - W9TIG wrote:
Tim,

Do you have links to official documentation of this that you can provide?  If this is true and verifiable, it is VERY good news, but with all of the misinformation (wherever that comes from) out there, we should all be working from an abundance of caution regarding good and bad news about this virus and its effects.

-
73
Gary D Vaught

We can engineer a solution to nearly any problem you can accurately define.

- somewhat anonymous



On Tue, Mar 24, 2020 at 8:45 AM Tim Spurgeon <tims173@...> wrote:
CMRA and BCARES brothers and sisters:

Medical Hope is coming -

For the past couple of weeks, I have been watching efforts to find a medical solution to the Wuhan Virus.  First
on Youtube, then on the news, then it popped up during the Vice President's daily update, three days ago.

The French started a human trial, more than two weeks ago, and are reporting very positive results.  The study
is entitled, "Hydroxychloroquine and Azithromycin (Z-pak) as a treatment of Covid-19: results of an open label
non-randomized clinical trial."  The combination of both drugs produces 100 percent cure in five days compared
to a control group that was still testing positive over the same time period.  But the fantastic news is that both
drugs are already FDA approved, and President Trump is already having the FDA evaluate this for Wuhan
Virus application.  This came up during his press conference, a couple of days ago.

Ten thousand units of this drug have already been sent to New York city, and they begin using it today.  We should
start hearing results in about one week.

Hydroxychloroquine has already been used in New Orleans to benefit critical cases, and last night Laura
Ingraham interviewed a doctor that has applied the above mentioned drugs to 350 patients.

Hydroxychloroquine is an anti-malarial drug, developed after WW-II, and it and Azithromycin are cheap,
off patent drugs, whose efficacy and side effects are well know

So, "keep the faith."  Good news is coming soon, and we are going to beat this pandemic.

73

Tim (W0TES)




--
73
W9TIG

Gary Vaught


Re: Some Good News

Gary Vaught - W9TIG
 

Tim,

Do you have links to official documentation of this that you can provide?  If this is true and verifiable, it is VERY good news, but with all of the misinformation (wherever that comes from) out there, we should all be working from an abundance of caution regarding good and bad news about this virus and its effects.

-
73
Gary D Vaught

We can engineer a solution to nearly any problem you can accurately define.

- somewhat anonymous



On Tue, Mar 24, 2020 at 8:45 AM Tim Spurgeon <tims173@...> wrote:
CMRA and BCARES brothers and sisters:

Medical Hope is coming -

For the past couple of weeks, I have been watching efforts to find a medical solution to the Wuhan Virus.  First
on Youtube, then on the news, then it popped up during the Vice President's daily update, three days ago.

The French started a human trial, more than two weeks ago, and are reporting very positive results.  The study
is entitled, "Hydroxychloroquine and Azithromycin (Z-pak) as a treatment of Covid-19: results of an open label
non-randomized clinical trial."  The combination of both drugs produces 100 percent cure in five days compared
to a control group that was still testing positive over the same time period.  But the fantastic news is that both
drugs are already FDA approved, and President Trump is already having the FDA evaluate this for Wuhan
Virus application.  This came up during his press conference, a couple of days ago.

Ten thousand units of this drug have already been sent to New York city, and they begin using it today.  We should
start hearing results in about one week.

Hydroxychloroquine has already been used in New Orleans to benefit critical cases, and last night Laura
Ingraham interviewed a doctor that has applied the above mentioned drugs to 350 patients.

Hydroxychloroquine is an anti-malarial drug, developed after WW-II, and it and Azithromycin are cheap,
off patent drugs, whose efficacy and side effects are well know

So, "keep the faith."  Good news is coming soon, and we are going to beat this pandemic.

73

Tim (W0TES)




--
73
W9TIG

Gary Vaught


Re: New members

Ralph Howard
 

Good point Gary.
As I have moved around the country, I have belonged to many clubs.  The most common thing was the best clubs did something.
On club was quite techinal being in Silicon Valley.  They always had a speaker.  If there was no speaker planned, you might get a tap on the shoulder and just like that, YOU ate the speaker for the night.
In Shrieveport LA, they worked parades,  ? thons, and even the Independence bowl.  Sometims just a day in the park.  Bring your go kit, a fox, the kids.  It was for the whole family.  That club might have 40 to 50 people at a regular meeting. 

We have an opportunity to have a "Rights of Spring" social event.  Once this virus thing is over.  Say in May.  Need lots of picnic tables.

My $$0.02 worth.


Ralph Howard
WD6BGN


From: main@CMRA.groups.io <main@CMRA.groups.io> on behalf of Gary Vaught - W9TIG <gdv.pops@...>
Sent: Tuesday, March 24, 2020 8:14:46 AM
To: main@CMRA.groups.io <main@CMRA.groups.io>
Subject: [CMRA] New members
 
I know this isn't a new topic of discussion, but I think it needs to be brought back up.

What can we do to encourage the newly licensed hams to join the club?

What ARE we doing to encourage the newly licensed hams to join the club?

And an issue near and dear to my heart, what can we do to encourage more YLs and XYLs to get into ham radio, and join the club?

A generation or two ago, a lot of people (mostly young men) got into radio out of a technical curiosity or a desire to serve the community.  People used to care about their neighbors and community.  We just don't see that happening in this (or the previous) generation.  What else do we have to offer in this age of networked, cellular technology and "what can you do for me?" worldview.

--
73
W9TIG

Gary Vaught




Re: Some Good News

Tim Spurgeon
 

CMRA and BCARES brothers and sisters:

Medical Hope is coming -

For the past couple of weeks, I have been watching efforts to find a medical solution to the Wuhan Virus. First
on Youtube, then on the news, then it popped up during the Vice President's daily update, three days ago.

The French started a human trial, more than two weeks ago, and are reporting very positive results. The study
is entitled, "Hydroxychloroquine and Azithromycin (Z-pak) as a treatment of Covid-19: results of an open label
non-randomized clinical trial." The combination of both drugs produces 100 percent cure in five days compared
to a control group that was still testing positive over the same time period. But the fantastic news is that both
drugs are already FDA approved, and President Trump is already having the FDA evaluate this for Wuhan
Virus application. This came up during his press conference, a couple of days ago.

Ten thousand units of this drug have already been sent to New York city, and they begin using it today. We should
start hearing results in about one week.

Hydroxychloroquine has already been used in New Orleans to benefit critical cases, and last night Laura
Ingraham interviewed a doctor that has applied the above mentioned drugs to 350 patients.

Hydroxychloroquine is an anti-malarial drug, developed after WW-II, and it and Azithromycin are cheap,
off patent drugs, whose efficacy and side effects are well know

So, "keep the faith." Good news is coming soon, and we are going to beat this pandemic.

73

Tim (W0TES)


Re: This was really great thanks

Boback
 

I have a Wouxun KG-UVD1P with charger, manual and remote mike you can have. If you upgrade, pass it back or pass it along. It was cheap and served me well for a few years.

Bob Ackerman
N6VZO

On 3/24/2020 7:07 AM, James Wiles wrote:
Being newly Hammed, and looking for a dual band radio,this Baofeng is appealing because I they’re cheap. But I guess you get what you pay for. I want to make the right choice and not buy junk. I don’t understand harmonics, but this article explains some of it, and now I’m think or looking at this Wouxun KG-UV9D, please if you have suggestions and where to buy, it would be most appreciated. I don’t have a call sign yet but I go by JW and my email address is wilesjw@hotmail.com

Thanks


New members

Gary Vaught - W9TIG
 

I know this isn't a new topic of discussion, but I think it needs to be brought back up.

What can we do to encourage the newly licensed hams to join the club?

What ARE we doing to encourage the newly licensed hams to join the club?

And an issue near and dear to my heart, what can we do to encourage more YLs and XYLs to get into ham radio, and join the club?

A generation or two ago, a lot of people (mostly young men) got into radio out of a technical curiosity or a desire to serve the community. People used to care about their neighbors and community. We just don't see that happening in this (or the previous) generation. What else do we have to offer in this age of networked, cellular technology and "what can you do for me?" worldview.

--
73
W9TIG

Gary Vaught


Re: This was really great thanks

James Wiles
 

Thanks


On Mar 24, 2020, at 7:21 AM, Gary Vaught - W9TIG <gdv.pops@...> wrote:


I'd suggest asking around the guys in the club/group.  A lot of the guys who have been doing this for a couple of years (or decades) have HTs and mobiles that they might let go for under a couple hundred dollars.  I got my first HT from a club member, and added an aftermarket antenna - it served me well for a couple of years as long as I stayed within transmit range of the repeater.

The $35 Baofeng looks appealing, but you really need to know what you're doing there or it can encourage some undesirable habits.

But that's all just my opinion.  Welcome to amateur radio!!!

-
Best Regards,
Gary D Vaught

We can engineer a solution to nearly any problem you can accurately define.

- somewhat anonymous



On Tue, Mar 24, 2020 at 7:16 AM James Wiles <wilesjw@...> wrote:
Being newly Hammed, and looking for a dual band radio,this Baofeng is appealing because I they’re cheap. But I guess you get what you pay for.  I want to make the right choice and not buy junk.  I don’t understand harmonics, but this article explains some of it, and now I’m think or looking at this Wouxun KG-UV9D, please if you have suggestions and where to buy, it would be most appreciated. I don’t have a call sign yet but I go by JW and my email address is wilesjw@...

Thanks




--
73
W9TIG

Gary Vaught


Re: This was really great thanks

Gary Vaught - W9TIG
 

I'd suggest asking around the guys in the club/group.  A lot of the guys who have been doing this for a couple of years (or decades) have HTs and mobiles that they might let go for under a couple hundred dollars.  I got my first HT from a club member, and added an aftermarket antenna - it served me well for a couple of years as long as I stayed within transmit range of the repeater.

The $35 Baofeng looks appealing, but you really need to know what you're doing there or it can encourage some undesirable habits.

But that's all just my opinion.  Welcome to amateur radio!!!

-
Best Regards,
Gary D Vaught

We can engineer a solution to nearly any problem you can accurately define.

- somewhat anonymous



On Tue, Mar 24, 2020 at 7:16 AM James Wiles <wilesjw@...> wrote:
Being newly Hammed, and looking for a dual band radio,this Baofeng is appealing because I they’re cheap. But I guess you get what you pay for.  I want to make the right choice and not buy junk.  I don’t understand harmonics, but this article explains some of it, and now I’m think or looking at this Wouxun KG-UV9D, please if you have suggestions and where to buy, it would be most appreciated. I don’t have a call sign yet but I go by JW and my email address is wilesjw@...

Thanks




--
73
W9TIG

Gary Vaught


This was really great thanks

James Wiles
 

Being newly Hammed, and looking for a dual band radio,this Baofeng is appealing because I they’re cheap. But I guess you get what you pay for. I want to make the right choice and not buy junk. I don’t understand harmonics, but this article explains some of it, and now I’m think or looking at this Wouxun KG-UV9D, please if you have suggestions and where to buy, it would be most appreciated. I don’t have a call sign yet but I go by JW and my email address is wilesjw@hotmail.com

Thanks


Re: RMS Relay Secure login failed. Incorrect password

Fred Dittrich
 

Bill and Jim

Thanks for your effort.

FYI, in recent months I have noticed 100% of Winmor stations terminate the session with 8-10 short back and forth transmissions.

73

Fred AE0FD


At 04:51 PM 3/19/2020, you wrote:
Well, Jim was able to get to re-booting the Winlink node computer just before he left for the day.Â

Winmor is now answering OK, but it seems to be having trouble disconnecting, but finally after many short bursts it does disconnect.

Hope this helps.Â
ARDOP seems to be operating correctly.
bill

On Thu, Mar 19, 2020 at 2:03 PM Fred Dittrich <fdittric@...> wrote:
Bill

Ah, that's the problem. Both of those frequencies
are at the top of the Winmor Winlink host table
when you sort for Path Reliability Estimate. If
they are not going to respond to WW then it might
be a good idea to remove them from that table.

73

Fred AE0FD



At 01:28 PM 3/19/2020, you wrote:
>Just connected fine to K0SI 40M dial=7.102, and 80M dial=3.585. Using ARDOP.Â
>AT 1:26 PM






--
Bill N0AXZ


Re: RMS Relay Secure login failed. Incorrect password

Bill McFarland - N0AXZ
 

Well, Jim was able to get to re-booting the Winlink node computer just before he left for the day. 

Winmor is now answering OK, but it seems to be having trouble disconnecting, but finally after many short bursts it does disconnect.

Hope this helps. 
ARDOP seems to be operating correctly.
bill

On Thu, Mar 19, 2020 at 2:03 PM Fred Dittrich <fdittric@...> wrote:
Bill

Ah, that's the problem. Both of those frequencies
are at the top of the Winmor Winlink host table
when you sort for Path Reliability Estimate. If
they are not going to respond to WW then it might
be a good idea to remove them from that table.

73

Fred AE0FD



At 01:28 PM 3/19/2020, you wrote:
>Just connected fine to K0SI 40M dial=7.102, and 80M dial=3.585. Using ARDOP.Â
>AT 1:26 PM






--
Bill N0AXZ


Re: RMS Relay Secure login failed. Incorrect password

Fred Dittrich
 

Bill

Thanks for the clarification and anomoly diagnosis.

73

Fred AE0FD



At 02:18 PM 3/19/2020, you wrote:
Fred,
Well, they are suppose to respond to Winmor, as well as ARDOP. I always use ARDOP since it is faster, and some day the Winlink team says they are going to remove Winmor.
 I will see if Jim Lawler is out at ECC during these times, and have him reboot the node to see if that will get Winmor back up and running. Try using ARDOP from the session pull down.Â
I have seen in the logs that we have had Winmor connects. Jim didn't answer just now as I tried to call him. So we are only doing ARDOP for now.
bill

On Thu, Mar 19, 2020 at 2:03 PM Fred Dittrich <fdittric@...> wrote:
Bill

Ah, that's the problem. Both of those frequencies
are at the top of the Winmor Winlink host table
when you sort for Path Reliability Estimate. If
they are not going to respond to WW then it might
be a good idea to remove them from that table.

73

Fred AE0FD



At 01:28 PM 3/19/2020, you wrote:
>Just connected fine to K0SI 40M dial=7.102, and 80M dial=3.585. Using ARDOP.Â
>AT 1:26 PM






--
Bill N0AXZ


Re: RMS Relay Secure login failed. Incorrect password

Bill McFarland - N0AXZ
 

Fred,
Well, they are suppose to respond to Winmor, as well as ARDOP. I always use ARDOP since it is faster, and some day the Winlink team says they are going to remove Winmor.
 I will see if Jim Lawler is out at ECC during these times, and have him reboot the node to see if that will get Winmor back up and running. Try using ARDOP from the session pull down. 
I have seen in the logs that we have had Winmor connects. Jim didn't answer just now as I tried to call him. So we are only doing ARDOP for now.
bill

On Thu, Mar 19, 2020 at 2:03 PM Fred Dittrich <fdittric@...> wrote:
Bill

Ah, that's the problem. Both of those frequencies
are at the top of the Winmor Winlink host table
when you sort for Path Reliability Estimate. If
they are not going to respond to WW then it might
be a good idea to remove them from that table.

73

Fred AE0FD



At 01:28 PM 3/19/2020, you wrote:
>Just connected fine to K0SI 40M dial=7.102, and 80M dial=3.585. Using ARDOP.Â
>AT 1:26 PM






--
Bill N0AXZ


Re: RMS Relay Secure login failed. Incorrect password

Fred Dittrich
 

Bill

Ah, that's the problem. Both of those frequencies are at the top of the Winmor Winlink host table when you sort for Path Reliability Estimate. If they are not going to respond to WW then it might be a good idea to remove them from that table.

73

Fred AE0FD

At 01:28 PM 3/19/2020, you wrote:
Just connected fine to K0SI 40M dial=7.102, and 80M dial=3.585. Using ARDOP.Â
AT 1:26 PM


Re: RMS Relay Secure login failed. Incorrect password

Bill McFarland - N0AXZ
 

Fred,
Just connected fine to K0SI 40M dial=7.102, and 80M dial=3.585. Using ARDOP. 
AT 1:26 PM

Don’t know what to suggest now. 
Bill


On Thu, Mar 19, 2020 at 11:26 AM Fred Dittrich <fdittric@...> wrote:
Bill

I failed to get any response at all from either K0SI-80m or K0SI-40m.

73

Fred AE0FD


At 11:21 AM 3/19/2020, you wrote:
Fred,
I hope you checked into K0SI on 40M and 80M and got through fine??
I can't get NS0A to answer my connect request at all. So you are doing better than me there.
Haven't seen that error message either.
BillÂ

On Thu, Mar 19, 2020 at 10:38 AM Fred Dittrich <fdittric@...> wrote:
Ralph

So the issue is with the host and not with my configuration. Good.

73

Fred AE0FD


At 10:13 AM 3/19/2020, you wrote:
Fred.
It looks like the node has a pawword issue with the Winlink server cloud.


Ralph Howard
WD6BGN


From: main@CMRA.groups.io <main@CMRA.groups.io> on behalf of Fred Dittrich <fdittric@...>
Sent: Thursday, March 19, 2020 9:19:25 AM
To: main@cmra.groups.io <main@cmra.groups.io>
Subject: [CMRA] RMS Relay Secure login failed. Incorrect password

Â
All

I have never received this error message before. Does anyone have an idea what the problem is?

Thanks

73

Fred AE0FD

----------------------------------------------------------------

*** Connected to Winlink RMS: NS0A @ 2020/03/19 14:12:01  USB Dial: 3586.000 at 2020/03/19 14:12:01
*** Station Bearing: 032,  Range: 204 miles
RMS Trimode 1.3.29.0 Welcome to the NS0A Gateway in Geneseo,IL
AE0FD has 120 minutes remaining with NS0A
{SFI = 072 On 2020-03-19 11:00 UTC}
*** MTD Stats Total connects = 185 Total messages = 113
*** Today's Stats Total connects = 8 Total messages = 2
*** Current Propagation Indices SFI=72 A=6 K=2 Q=0.38
Message will be sent to a CMS through the Internet and also forwarded to the recipient via HF radio.
;WL2K-RMS_Relay
[WL2K-3.0.55.0-B2FWIHJM$]
;PQ: 64890045
NS0A RMS Relay >
   ;FW: AE0FD
   [RMS Express-1.5.26.0-B2FHM$]
   ;PR: 59219142
   ; NS0A DE AE0FD (EM38UX)
   FF
*** RMS Relay Secure login failed. Incorrect password. - Disconnecting (127.0.0.1)
*** Disconnected from Winlink RMS: NS0A @ 2020/03/19 14:14:46
*** Session: 2.7 min;  Avg Thruput: 0 Bytes/min;   1 Min Peak Thruput: 387 Bytes/min



--
Bill N0AXZ

--
Bill


Re: RMS Relay Secure login failed. Incorrect password

Fred Dittrich
 

Bill

I failed to get any response at all from either K0SI-80m or K0SI-40m.

73

Fred AE0FD


At 11:21 AM 3/19/2020, you wrote:
Fred,
I hope you checked into K0SI on 40M and 80M and got through fine??
I can't get NS0A to answer my connect request at all. So you are doing better than me there.
Haven't seen that error message either.
BillÂ

On Thu, Mar 19, 2020 at 10:38 AM Fred Dittrich <fdittric@...> wrote:
Ralph

So the issue is with the host and not with my configuration. Good.

73

Fred AE0FD


At 10:13 AM 3/19/2020, you wrote:
Fred.
It looks like the node has a pawword issue with the Winlink server cloud.


Ralph Howard
WD6BGN


From: main@CMRA.groups.io <main@CMRA.groups.io> on behalf of Fred Dittrich <fdittric@...>
Sent: Thursday, March 19, 2020 9:19:25 AM
To: main@cmra.groups.io <main@cmra.groups.io>
Subject: [CMRA] RMS Relay Secure login failed. Incorrect password
Â
All

I have never received this error message before. Does anyone have an idea what the problem is?

Thanks

73

Fred AE0FD

----------------------------------------------------------------

*** Connected to Winlink RMS: NS0A @ 2020/03/19 14:12:01  USB Dial: 3586.000 at 2020/03/19 14:12:01
*** Station Bearing: 032,  Range: 204 miles
RMS Trimode 1.3.29.0 Welcome to the NS0A Gateway in Geneseo,IL
AE0FD has 120 minutes remaining with NS0A
{SFI = 072 On 2020-03-19 11:00 UTC}
*** MTD Stats Total connects = 185 Total messages = 113
*** Today's Stats Total connects = 8 Total messages = 2
*** Current Propagation Indices SFI=72 A=6 K=2 Q=0.38
Message will be sent to a CMS through the Internet and also forwarded to the recipient via HF radio.
;WL2K-RMS_Relay
[WL2K-3.0.55.0-B2FWIHJM$]
;PQ: 64890045
NS0A RMS Relay >
   ;FW: AE0FD
   [RMS Express-1.5.26.0-B2FHM$]
   ;PR: 59219142
   ; NS0A DE AE0FD (EM38UX)
   FF
*** RMS Relay Secure login failed. Incorrect password. - Disconnecting (127.0.0.1)
*** Disconnected from Winlink RMS: NS0A @ 2020/03/19 14:14:46
*** Session: 2.7 min;  Avg Thruput: 0 Bytes/min;   1 Min Peak Thruput: 387 Bytes/min



--
Bill N0AXZ


Re: RMS Relay Secure login failed. Incorrect password

Bill McFarland - N0AXZ
 

Fred,
I hope you checked into K0SI on 40M and 80M and got through fine??
I can't get NS0A to answer my connect request at all. So you are doing better than me there.
Haven't seen that error message either.
Bill 

On Thu, Mar 19, 2020 at 10:38 AM Fred Dittrich <fdittric@...> wrote:
Ralph

So the issue is with the host and not with my configuration. Good.

73

Fred AE0FD


At 10:13 AM 3/19/2020, you wrote:
Fred.
It looks like the node has a pawword issue with the Winlink server cloud.


Ralph Howard
WD6BGN


From: main@CMRA.groups.io <main@CMRA.groups.io> on behalf of Fred Dittrich <fdittric@...>
Sent: Thursday, March 19, 2020 9:19:25 AM
To: main@cmra.groups.io <main@cmra.groups.io>
Subject: [CMRA] RMS Relay Secure login failed. Incorrect password

 
All

I have never received this error message before. Does anyone have an idea what the problem is?

Thanks

73

Fred AE0FD

----------------------------------------------------------------

*** Connected to Winlink RMS: NS0A @ 2020/03/19 14:12:01  USB Dial: 3586.000 at 2020/03/19 14:12:01
*** Station Bearing: 032,  Range: 204 miles
RMS Trimode 1.3.29.0 Welcome to the NS0A Gateway in Geneseo,IL
AE0FD has 120 minutes remaining with NS0A
{SFI = 072 On 2020-03-19 11:00 UTC}
*** MTD Stats Total connects = 185 Total messages = 113
*** Today's Stats Total connects = 8 Total messages = 2
*** Current Propagation Indices SFI=72 A=6 K=2 Q=0.38
Message will be sent to a CMS through the Internet and also forwarded to the recipient via HF radio.
;WL2K-RMS_Relay
[WL2K-3.0.55.0-B2FWIHJM$]
;PQ: 64890045
NS0A RMS Relay >
   ;FW: AE0FD
   [RMS Express-1.5.26.0-B2FHM$]
   ;PR: 59219142
   ; NS0A DE AE0FD (EM38UX)
   FF
*** RMS Relay Secure login failed. Incorrect password. - Disconnecting (127.0.0.1)
*** Disconnected from Winlink RMS: NS0A @ 2020/03/19 14:14:46
*** Session: 2.7 min;  Avg Thruput: 0 Bytes/min;   1 Min Peak Thruput: 387 Bytes/min



--
Bill N0AXZ


Re: RMS Relay Secure login failed. Incorrect password

Ralph Howard
 

I hosted for a while on VHF.  You have a special password to get in.  I had it off for a long period of time and get a similar message when my system trys to log in.  Ah a good project for this down time would be to get it back up. 

Cheers.


Ralph Howard
WD6BGN


From: main@CMRA.groups.io <main@CMRA.groups.io> on behalf of Fred Dittrich <fdittric@...>
Sent: Thursday, March 19, 2020 10:38:22 AM
To: main@CMRA.groups.io <main@CMRA.groups.io>
Subject: Re: [CMRA] RMS Relay Secure login failed. Incorrect password
 
Ralph

So the issue is with the host and not with my configuration. Good.

73

Fred AE0FD


At 10:13 AM 3/19/2020, you wrote:
Fred.
It looks like the node has a pawword issue with the Winlink server cloud.


Ralph Howard
WD6BGN


From: main@CMRA.groups.io <main@CMRA.groups.io> on behalf of Fred Dittrich <fdittric@...>
Sent: Thursday, March 19, 2020 9:19:25 AM
To: main@cmra.groups.io <main@cmra.groups.io>
Subject: [CMRA] RMS Relay Secure login failed. Incorrect password

 
All

I have never received this error message before. Does anyone have an idea what the problem is?

Thanks

73

Fred AE0FD

----------------------------------------------------------------

*** Connected to Winlink RMS: NS0A @ 2020/03/19 14:12:01  USB Dial: 3586.000 at 2020/03/19 14:12:01
*** Station Bearing: 032,  Range: 204 miles
RMS Trimode 1.3.29.0 Welcome to the NS0A Gateway in Geneseo,IL
AE0FD has 120 minutes remaining with NS0A
{SFI = 072 On 2020-03-19 11:00 UTC}
*** MTD Stats Total connects = 185 Total messages = 113
*** Today's Stats Total connects = 8 Total messages = 2
*** Current Propagation Indices SFI=72 A=6 K=2 Q=0.38
Message will be sent to a CMS through the Internet and also forwarded to the recipient via HF radio.
;WL2K-RMS_Relay
[WL2K-3.0.55.0-B2FWIHJM$]
;PQ: 64890045
NS0A RMS Relay >
   ;FW: AE0FD
   [RMS Express-1.5.26.0-B2FHM$]
   ;PR: 59219142
   ; NS0A DE AE0FD (EM38UX)
   FF
*** RMS Relay Secure login failed. Incorrect password. - Disconnecting (127.0.0.1)
*** Disconnected from Winlink RMS: NS0A @ 2020/03/19 14:14:46
*** Session: 2.7 min;  Avg Thruput: 0 Bytes/min;   1 Min Peak Thruput: 387 Bytes/min

481 - 500 of 4248