Topics

Resources mentioned regarding portable antennas


Bryan Nehl
 

I mentioned a couple of resources at the meeting tonight.

Here are links to them.

“Random Wire Lengths”

https://udel.edu/~mm/ham/randomWire/

http://www.hamuniverse.com/randomwireantennalengths.html

Good lengths in ft: 29  35.5  41  58  71  84  107  119  148  203  347  407  423

Trapped End Fed Half Wave Antennas

http://peanutpower.co.uk/efhw

There are quite a few resources on the internet about trifilar winding a 9:1 transformer.

For the 9:1 and 49:1 transformers you can also wind a primary and secondary on the same core independently.

In the example below L1 (primary) has 3 turns and L2 at 9 turns.  Ratio is 1:3, square that 3 and it is a 9:1 transformer.  Could also easily wind a primary with 2 turns and secondary with 14 turns for EFHW (49:1). 
 
Wired up ~17’ radiator and 6’ counterpoise.  Kx3 had no trouble tuning it anywhere.  Typically I use a 58’ radiator with 9:1 or the trapped EFHW.

The article about portable masts can be found here: http://www.4sqrp.com/4sqrpNewsLetter/201908.pdf

72/73 de Bryan, k0emt



Fred Dittrich
 

Bryan

Your presentation gave us a rich source of devices for go packs. Thanks for sharing.

73

Fred AE0FD



At 10:46 PM 3/10/2020, you wrote:
I mentioned a couple of resources at the meeting tonight.

Here are links to them.

“Random Wire Lengths�

https://udel.edu/~mm/ham/randomWire/

http://www.hamuniverse.com/randomwireantennalengths.html

Good lengths in ft: 29  35.5  41  58  71  84  107  119  148  203  347  407  423

Trapped End Fed Half Wave Antennas

http://peanutpower.co.uk/efhw

There are quite a few resources on the internet about trifilar winding a 9:1 transformer.

For the 9:1 and 49:1 transformers you can also wind a primary and secondary on the same core independently.

In the example below L1 (primary) has 3 turns and L2 at 9 turns.  Ratio is 1:3, square that 3 and it is a 9:1 transformer.  Could also easily wind a primary with 2 turns and secondary with 14 turns for EFHW (49:1).
 
Wired up ~17’ radiator and 6’ counterpoise.  Kx3 had no trouble tuning it anywhere.  Typically I use a 58’ radiator with 9:1 or the trapped EFHW.

The article about portable masts can be found here: http://www.4sqrp.com/4sqrpNewsLetter/201908.pdf

72/73 de Bryan, k0emt

[]


Gary Vaught - W9TIG
 

Was unable to make the meeting, but am very grateful for the follow up!

-
Best Regards,
Gary D Vaught

We can engineer a solution to nearly any problem you can accurately define.

- somewhat anonymous



On Wed, Mar 11, 2020 at 7:20 AM Fred Dittrich <fdittric@...> wrote:
Bryan

Your presentation gave us a rich source of devices for go packs. Thanks for sharing.

73

Fred AE0FD



At 10:46 PM 3/10/2020, you wrote:
I mentioned a couple of resources at the meeting tonight.

Here are links to them.

“Random Wire Lengths�

https://udel.edu/~mm/ham/randomWire/

http://www.hamuniverse.com/randomwireantennalengths.html

Good lengths in ft: 29  35.5  41  58  71  84  107  119  148  203  347  407  423

Trapped End Fed Half Wave Antennas

http://peanutpower.co.uk/efhw

There are quite a few resources on the internet about trifilar winding a 9:1 transformer.

For the 9:1 and 49:1 transformers you can also wind a primary and secondary on the same core independently.

In the example below L1 (primary) has 3 turns and L2 at 9 turns.  Ratio is 1:3, square that 3 and it is a 9:1 transformer.  Could also easily wind a primary with 2 turns and secondary with 14 turns for EFHW (49:1).
 
Wired up ~17’ radiator and 6’ counterpoise.  Kx3 had no trouble tuning it anywhere.  Typically I use a 58’ radiator with 9:1 or the trapped EFHW.

The article about portable masts can be found here: http://www.4sqrp.com/4sqrpNewsLetter/201908.pdf

72/73 de Bryan, k0emt

[]


--
73
W9TIG

Gary Vaught


James Whitehill
 

Bryan,

Thanks for the additional, useful information in this email.  But special thanks for the presentation last night, which excited a lot of interest.  I'm glad you went last, on the principle of saving the best for last!  Your presentation, which you have done before elsewhere, showed polish and efficiency.  Lots of ideas and experiment are embedded in your kit and I think will inspire others, including me, to develop our own kits and antennas.  Well done!

Jim, N0SSM

On Tue, Mar 10, 2020 at 10:46 PM Bryan Nehl <k0emt@...> wrote:
I mentioned a couple of resources at the meeting tonight.

Here are links to them.

“Random Wire Lengths”

https://udel.edu/~mm/ham/randomWire/

http://www.hamuniverse.com/randomwireantennalengths.html

Good lengths in ft: 29  35.5  41  58  71  84  107  119  148  203  347  407  423

Trapped End Fed Half Wave Antennas

http://peanutpower.co.uk/efhw

There are quite a few resources on the internet about trifilar winding a 9:1 transformer.

For the 9:1 and 49:1 transformers you can also wind a primary and secondary on the same core independently.

In the example below L1 (primary) has 3 turns and L2 at 9 turns.  Ratio is 1:3, square that 3 and it is a 9:1 transformer.  Could also easily wind a primary with 2 turns and secondary with 14 turns for EFHW (49:1). 
 
Wired up ~17’ radiator and 6’ counterpoise.  Kx3 had no trouble tuning it anywhere.  Typically I use a 58’ radiator with 9:1 or the trapped EFHW.

The article about portable masts can be found here: http://www.4sqrp.com/4sqrpNewsLetter/201908.pdf

72/73 de Bryan, k0emt



Scott Vince
 

Bryan
What did you tell me to look up? Concerning hiking and radio?
Scott 
W9EQD 


On Mar 11, 2020, at 09:58, James Whitehill <jdwhitehill1603@...> wrote:


Bryan,

Thanks for the additional, useful information in this email.  But special thanks for the presentation last night, which excited a lot of interest.  I'm glad you went last, on the principle of saving the best for last!  Your presentation, which you have done before elsewhere, showed polish and efficiency.  Lots of ideas and experiment are embedded in your kit and I think will inspire others, including me, to develop our own kits and antennas.  Well done!

Jim, N0SSM

On Tue, Mar 10, 2020 at 10:46 PM Bryan Nehl <k0emt@...> wrote:
I mentioned a couple of resources at the meeting tonight.

Here are links to them.

“Random Wire Lengths”

https://udel.edu/~mm/ham/randomWire/

http://www.hamuniverse.com/randomwireantennalengths.html

Good lengths in ft: 29  35.5  41  58  71  84  107  119  148  203  347  407  423

Trapped End Fed Half Wave Antennas

http://peanutpower.co.uk/efhw

There are quite a few resources on the internet about trifilar winding a 9:1 transformer.

For the 9:1 and 49:1 transformers you can also wind a primary and secondary on the same core independently.

In the example below L1 (primary) has 3 turns and L2 at 9 turns.  Ratio is 1:3, square that 3 and it is a 9:1 transformer.  Could also easily wind a primary with 2 turns and secondary with 14 turns for EFHW (49:1). 
 
Wired up ~17’ radiator and 6’ counterpoise.  Kx3 had no trouble tuning it anywhere.  Typically I use a 58’ radiator with 9:1 or the trapped EFHW.

The article about portable masts can be found here: http://www.4sqrp.com/4sqrpNewsLetter/201908.pdf

72/73 de Bryan, k0emt

<IMG_2264.jpeg>


Chris Swisher
 

While not as sexy as the other presentations, here is the cheap yagi design I presented to the group: https://www.wa5vjb.com/yagi-pdf/cheapyagi.pdf .

On Wed, Mar 11, 2020 at 10:04 AM Scott Vince <tigergas@...> wrote:
Bryan
What did you tell me to look up? Concerning hiking and radio?
Scott 
W9EQD 


On Mar 11, 2020, at 09:58, James Whitehill <jdwhitehill1603@...> wrote:


Bryan,

Thanks for the additional, useful information in this email.  But special thanks for the presentation last night, which excited a lot of interest.  I'm glad you went last, on the principle of saving the best for last!  Your presentation, which you have done before elsewhere, showed polish and efficiency.  Lots of ideas and experiment are embedded in your kit and I think will inspire others, including me, to develop our own kits and antennas.  Well done!

Jim, N0SSM

On Tue, Mar 10, 2020 at 10:46 PM Bryan Nehl <k0emt@...> wrote:
I mentioned a couple of resources at the meeting tonight.

Here are links to them.

“Random Wire Lengths”

https://udel.edu/~mm/ham/randomWire/

http://www.hamuniverse.com/randomwireantennalengths.html

Good lengths in ft: 29  35.5  41  58  71  84  107  119  148  203  347  407  423

Trapped End Fed Half Wave Antennas

http://peanutpower.co.uk/efhw

There are quite a few resources on the internet about trifilar winding a 9:1 transformer.

For the 9:1 and 49:1 transformers you can also wind a primary and secondary on the same core independently.

In the example below L1 (primary) has 3 turns and L2 at 9 turns.  Ratio is 1:3, square that 3 and it is a 9:1 transformer.  Could also easily wind a primary with 2 turns and secondary with 14 turns for EFHW (49:1). 
 
Wired up ~17’ radiator and 6’ counterpoise.  Kx3 had no trouble tuning it anywhere.  Typically I use a 58’ radiator with 9:1 or the trapped EFHW.

The article about portable masts can be found here: http://www.4sqrp.com/4sqrpNewsLetter/201908.pdf

72/73 de Bryan, k0emt

<IMG_2264.jpeg>


James Whitehill
 

Thanks to all presenters for their contributions to the portable antenna program on Tuesday.  Without  exception, each of you were  brief and compelling in showing the VHF and HF antennas you built or bought.  K0EMT's presentation was the longest and the last.  Bryan had forewarned me over last weekend by email about his extensive projects in QRP antennas and I gave permission for his extended demos and explanations.

Good work by all of you: K0PHP, WD6BGN, AE0FD, W0TES, and K0MET.

Jim, N0SSM


Bryan Nehl
 

For those that are interested in Hiking and Radio, check out Summits On The Air Summits on the Air


The SOTA focus is on operating from defined summits.

Parks on the Air, and World Wide Flora and Fauna are similar programs that focus on operating from parks.

On Wednesday, March 11, 2020, 10:04:24 AM CDT, Scott Vince <tigergas@...> wrote:


Bryan
What did you tell me to look up? Concerning hiking and radio?
Scott 
W9EQD 


On Mar 11, 2020, at 09:58, James Whitehill <jdwhitehill1603@...> wrote:


Bryan,

Thanks for the additional, useful information in this email.  But special thanks for the presentation last night, which excited a lot of interest.  I'm glad you went last, on the principle of saving the best for last!  Your presentation, which you have done before elsewhere, showed polish and efficiency.  Lots of ideas and experiment are embedded in your kit and I think will inspire others, including me, to develop our own kits and antennas.  Well done!

Jim, N0SSM

On Tue, Mar 10, 2020 at 10:46 PM Bryan Nehl <k0emt@...> wrote:
I mentioned a couple of resources at the meeting tonight.

Here are links to them.

“Random Wire Lengths”

https://udel.edu/~mm/ham/randomWire/

http://www.hamuniverse.com/randomwireantennalengths.html

Good lengths in ft: 29  35.5  41  58  71  84  107  119  148  203  347  407  423

Trapped End Fed Half Wave Antennas

http://peanutpower.co.uk/efhw

There are quite a few resources on the internet about trifilar winding a 9:1 transformer.

For the 9:1 and 49:1 transformers you can also wind a primary and secondary on the same core independently.

In the example below L1 (primary) has 3 turns and L2 at 9 turns.  Ratio is 1:3, square that 3 and it is a 9:1 transformer.  Could also easily wind a primary with 2 turns and secondary with 14 turns for EFHW (49:1). 
 
Wired up ~17’ radiator and 6’ counterpoise.  Kx3 had no trouble tuning it anywhere.  Typically I use a 58’ radiator with 9:1 or the trapped EFHW.

The article about portable masts can be found here: http://www.4sqrp.com/4sqrpNewsLetter/201908.pdf

72/73 de Bryan, k0emt

<IMG_2264.jpeg>