K0SI-10 frozen this morning


Boback
 

I can get in now. Thanks.

Bob, N6VZO


On 4/9/21 10:26 AM, Fred Dittrich wrote:
Bill

Thanks for looking into it. Win 10 - grrrrrrrrrrrrrrrrrrrrrr

73

Fred AE0FD


At 08:31 AM 4/9/2021, you wrote:
Windows 10 upgrade on that computer stopped waiting for user input "to make things better"!!
Then the TNC got into a state that the software could not reset, and I am now waiting for Jim Lawler to physically reset the TNC.
bill

On Fri, Apr 9, 2021 at 7:30 AM Fred Dittrich <fdittric@...> wrote:
Hi

It says:

*** Starting to call K0SI-10
*** Opening serial port COM2; 9600 baud; Kantronics
*** Connecting to K0SI-10
*** CONNECTED TO K0SI-10

... and proceeds no further.

73

Fred AE0FD








--
Bill N0AXZ


Fred Dittrich
 

Bill

Thanks for looking into it. Win 10 - grrrrrrrrrrrrrrrrrrrrrr

73

Fred AE0FD


At 08:31 AM 4/9/2021, you wrote:
Windows 10 upgrade on that computer stopped waiting for user input "to make things better"!!
Then the TNC got into a state that the software could not reset, and I am now waiting for Jim Lawler to physically reset the TNC.
bill

On Fri, Apr 9, 2021 at 7:30 AM Fred Dittrich <fdittric@...> wrote:
Hi

It says:

*** Starting to call K0SI-10
*** Opening serial port COM2; 9600 baud; Kantronics
*** Connecting to K0SI-10
*** CONNECTED TO K0SI-10

... and proceeds no further.

73

Fred AE0FD








--
Bill N0AXZ


KC0EZE Ernest Shaw
 

I just verified, that the station is back up now.

73,
KC0EZE

On Apr 9, 2021, at 9:39 AM, Boback <RNAckerman@...> wrote:

I cannot get it to answer. but my signal is weak as I am using a handheld.

Bob, N6VZO

On 4/9/21 9:11 AM, Bill McFarland - N0AXZ wrote:
I believe K0SI-10 is up and running again. I cannot confirm 100% from my RV in AR now, but try again when you have time.
bill

On Fri, Apr 9, 2021 at 7:30 AM Fred Dittrich <fdittric@...> wrote:
Hi

It says:

*** Starting to call K0SI-10
*** Opening serial port COM2; 9600 baud; Kantronics
*** Connecting to K0SI-10
*** CONNECTED TO K0SI-10

... and proceeds no further.

73

Fred AE0FD








--
Bill N0AXZ


Boback
 

I cannot get it to answer. but my signal is weak as I am using a handheld.

Bob, N6VZO

On 4/9/21 9:11 AM, Bill McFarland - N0AXZ wrote:
I believe K0SI-10 is up and running again. I cannot confirm 100% from my RV in AR now, but try again when you have time.
bill

On Fri, Apr 9, 2021 at 7:30 AM Fred Dittrich <fdittric@...> wrote:
Hi

It says:

*** Starting to call K0SI-10
*** Opening serial port COM2; 9600 baud; Kantronics
*** Connecting to K0SI-10
*** CONNECTED TO K0SI-10

... and proceeds no further.

73

Fred AE0FD








--
Bill N0AXZ


Bill McFarland - N0AXZ
 

I believe K0SI-10 is up and running again. I cannot confirm 100% from my RV in AR now, but try again when you have time.
bill

On Fri, Apr 9, 2021 at 7:30 AM Fred Dittrich <fdittric@...> wrote:
Hi

It says:

*** Starting to call K0SI-10
*** Opening serial port COM2; 9600 baud; Kantronics
*** Connecting to K0SI-10
*** CONNECTED TO K0SI-10

... and proceeds no further.

73

Fred AE0FD








--
Bill N0AXZ


Boback
 

Windows 10 updates screw up a lot of things.

Bob, N6VZO

On 4/9/21 8:31 AM, Bill McFarland - N0AXZ wrote:
Windows 10 upgrade on that computer stopped waiting for user input "to make things better"!!
Then the TNC got into a state that the software could not reset, and I am now waiting for Jim Lawler to physically reset the TNC.
bill

On Fri, Apr 9, 2021 at 7:30 AM Fred Dittrich <fdittric@...> wrote:
Hi

It says:

*** Starting to call K0SI-10
*** Opening serial port COM2; 9600 baud; Kantronics
*** Connecting to K0SI-10
*** CONNECTED TO K0SI-10

... and proceeds no further.

73

Fred AE0FD








--
Bill N0AXZ


Bill McFarland - N0AXZ
 

Windows 10 upgrade on that computer stopped waiting for user input "to make things better"!!
Then the TNC got into a state that the software could not reset, and I am now waiting for Jim Lawler to physically reset the TNC.
bill

On Fri, Apr 9, 2021 at 7:30 AM Fred Dittrich <fdittric@...> wrote:
Hi

It says:

*** Starting to call K0SI-10
*** Opening serial port COM2; 9600 baud; Kantronics
*** Connecting to K0SI-10
*** CONNECTED TO K0SI-10

... and proceeds no further.

73

Fred AE0FD








--
Bill N0AXZ


Fred Dittrich
 

Hi

It says:

*** Starting to call K0SI-10
*** Opening serial port COM2; 9600 baud; Kantronics
*** Connecting to K0SI-10
*** CONNECTED TO K0SI-10

... and proceeds no further.

73

Fred AE0FD