K0SI-10 - odd disconnection


KC0EZE Ernest Shaw
 

I have had that happen sometimes.  You made it all the way thought the session, I think that there was an error in transmission on either yours or K0SI-10’s disconnect packet, since the session was over the other side likely just said, ok, I’m done anyway.


I just tried, and all was well for me:
*** Starting to call K0SI-10
*** Opening serial port COM3; 9600 baud; Kenwood TH-D7/D72 A-Band
*** Connecting to K0SI-10
*** Connected to K0SI-10 at 2021/04/14 15:49:18

*** Connected to K0SI-10 at 2021/04/14 15:49:23

[WL2K-5.0-B2FWIHJM$]
;PQ: 96872881
CMS via K0SI >
   ;FW: KC0EZE
   [RMS Express-1.5.35.0-B2FHM$]

   ;PR: 82755207
   ; K0SI-10 DE KC0EZE (EM38TW)
   FC EM QZTL7B560W7A 213 191 0
   F> A9
;PM: KC0EZE AZOPWYOL6VU5 270 N0AXZ@... Re: WX0BC RMS packet test
FS Y
*** Sending QZTL7B560W7A.
FC EM AZOPWYOL6VU5 403 270 0
*** Completed send of message QZTL7B560W7A
*** Sent 1 message.  Bytes: 212,  Time: 00:10,  bytes/minute: 1244
F> 3D
   FS Y
*** Receiving AZOPWYOL6VU5
*** AZOPWYOL6VU5 - 418/282 bytes received
*** Bytes: 306,  Time: 00:04,  bytes/minute: 4557
   FF
FQ
*** --- End of session at 2021/04/14 15:50:02 ---
*** Messages sent: 1.  Total bytes sent: 212,  Time: 00:39,  bytes/minute: 323
*** Messages Received: 1.  Total bytes received: 306,  Total session time: 00:39,  bytes/minute: 466
*** Disconnected at 2021/04/14 15:50:10

*** Disconnect reported.


73, 
KC0EZE


On Apr 14, 2021, at 9:42 AM, Bill McFarland - N0AXZ <billmcfarland10@...> wrote:

Fred,
I believe the disconnect with time out is not bad although not normal. It looks like your message was delivered. Maybe someone there can try it again. 
Bill

On Wed, Apr 14, 2021 at 7:23 AM Fred Dittrich <fdittric@...> wrote:
Hi

This morning I sent a short message and instead of giving me the 
normal disconnection message, it gave me this:

------------------------------------------------------------------------
*** Starting to call K0SI-10
*** Opening serial port COM2; 9600 baud; Kantronics
*** Connecting to K0SI-10
*** CONNECTED TO K0SI-10

[WL2K-5.0-B2FWIHJM$]
;PQ: 85425880
CMS via K0SI >
    ;FW: AE0FD
    [RMS Express-1.5.36.0-B2FHM$]

    ;PR: 07380767
    ; K0SI-10 DE AE0FD (EM38UX)
    FC EM U4MU7NRP6344 441 293 0
    F> AE
FS Y
*** Sending U4MU7NRP6344.
FF
*** Completed send of message U4MU7NRP6344
*** Sent 1 message.  Bytes: 343,  Time: 00:08,  bytes/minute: 2470
    FQ
*** --- End of session at 2021/04/14 12:18:27 ---
*** Messages sent: 1.  Total bytes sent: 343,  Time: 00:30,  bytes/minute: 681
*** Messages Received: 0.  Total bytes received: 0,  Total session 
time: 00:30,  bytes/minute: 0
*** Disconnecting
*** Disconnecting due to timeout
------------------------------------------------------------------------

There was no latency before the timeout message.

73

Fred AE0FD






-- 
Bill


Bill McFarland - N0AXZ
 

Fred,
I believe the disconnect with time out is not bad although not normal. It looks like your message was delivered. Maybe someone there can try it again. 
Bill

On Wed, Apr 14, 2021 at 7:23 AM Fred Dittrich <fdittric@...> wrote:
Hi

This morning I sent a short message and instead of giving me the
normal disconnection message, it gave me this:

------------------------------------------------------------------------
*** Starting to call K0SI-10
*** Opening serial port COM2; 9600 baud; Kantronics
*** Connecting to K0SI-10
*** CONNECTED TO K0SI-10

[WL2K-5.0-B2FWIHJM$]
;PQ: 85425880
CMS via K0SI >
    ;FW: AE0FD
    [RMS Express-1.5.36.0-B2FHM$]

    ;PR: 07380767
    ; K0SI-10 DE AE0FD (EM38UX)
    FC EM U4MU7NRP6344 441 293 0
    F> AE
FS Y
*** Sending U4MU7NRP6344.
FF
*** Completed send of message U4MU7NRP6344
*** Sent 1 message.  Bytes: 343,  Time: 00:08,  bytes/minute: 2470
    FQ
*** --- End of session at 2021/04/14 12:18:27 ---
*** Messages sent: 1.  Total bytes sent: 343,  Time: 00:30,  bytes/minute: 681
*** Messages Received: 0.  Total bytes received: 0,  Total session
time: 00:30,  bytes/minute: 0
*** Disconnecting
*** Disconnecting due to timeout
------------------------------------------------------------------------

There was no latency before the timeout message.

73

Fred AE0FD






--
Bill


Fred Dittrich
 

Hi

This morning I sent a short message and instead of giving me the normal disconnection message, it gave me this:

------------------------------------------------------------------------
*** Starting to call K0SI-10
*** Opening serial port COM2; 9600 baud; Kantronics
*** Connecting to K0SI-10
*** CONNECTED TO K0SI-10

[WL2K-5.0-B2FWIHJM$]
;PQ: 85425880
CMS via K0SI >
;FW: AE0FD
[RMS Express-1.5.36.0-B2FHM$]

;PR: 07380767
; K0SI-10 DE AE0FD (EM38UX)
FC EM U4MU7NRP6344 441 293 0
F> AE
FS Y
*** Sending U4MU7NRP6344.
FF
*** Completed send of message U4MU7NRP6344
*** Sent 1 message. Bytes: 343, Time: 00:08, bytes/minute: 2470
FQ
*** --- End of session at 2021/04/14 12:18:27 ---
*** Messages sent: 1. Total bytes sent: 343, Time: 00:30, bytes/minute: 681
*** Messages Received: 0. Total bytes received: 0, Total session time: 00:30, bytes/minute: 0
*** Disconnecting
*** Disconnecting due to timeout
------------------------------------------------------------------------

There was no latency before the timeout message.

73

Fred AE0FD