K0SI-10 error


Fred Dittrich
 

Hi

Now it says:

*** Starting to call K0SI-10
*** Opening serial port COM3; 9600 baud; Kantronics
*** Connecting to K0SI-10
*** CONNECTED TO K0SI-10

[WL2K-5.0-B2FWIHJM$]
CMS via K0SI >
;FW: AE0FD
[RMS Express-1.5.42.0-B2FHM$]

; K0SI-10 DE AE0FD (EM38UX)
FF
*** [2] Login failed - no response to challenge - Disconnecting (63.239.57.158)
*** Disconnected at 2021/11/26 14:08:54

*** Disconnect reported.

73

Fred AE0FD


Bill McFarland - N0AXZ
 

Fred,
I didn't change anything and here are my results.
I think yours may have occurred due to an Internet hick-up at the Server side, not at all certain, but my connection worked as expected.
see:

*** Starting to call K0SI-10
*** Opening serial port COM3; 9600 baud; Kenwood TS-2000
*** Connecting to K0SI-10
*** Connected to K0SI-10 at 2021/11/26 14:49:50

[WL2K-5.0-B2FWIHJM$]
;PQ: 85882908
CMS via K0SI >
   ;FW: N0AXZ BCARES-EC|67353255
   [RMS Express-1.5.42.0-B2FHM$]

   ;PR: 61530211
   ; K0SI-10 DE N0AXZ (EM38TW)
   FF
FQ
*** --- End of session at 2021/11/26 14:50:07 ---
*** Messages sent: 0.  Total bytes sent: 0,  Time: 00:16,  bytes/minute: 0
*** Messages Received: 0.  Total bytes received: 0,  Total session time: 00:16,  bytes/minute: 0
*** Disconnected at 2021/11/26 14:50:15

*** Disconnect reported.

so you might try again when you have time..
73,
bill N0AXZ

On Fri, Nov 26, 2021 at 8:14 AM Fred Dittrich <fdittric@...> wrote:
Hi

Now it says:

*** Starting to call K0SI-10
*** Opening serial port COM3; 9600 baud; Kantronics
*** Connecting to K0SI-10
*** CONNECTED TO K0SI-10

[WL2K-5.0-B2FWIHJM$]
CMS via K0SI >
    ;FW: AE0FD
    [RMS Express-1.5.42.0-B2FHM$]

    ; K0SI-10 DE AE0FD (EM38UX)
    FF
*** [2] Login failed - no response to challenge - Disconnecting (63.239.57.158)
*** Disconnected at 2021/11/26 14:08:54

*** Disconnect reported.

73

Fred AE0FD








--
Bill N0AXZ


Fred Dittrich
 

Bill

I rechecked and I confirm that it is working now. Thanks for checking.

73

Fred AE0FD



At 08:52 AM 11/26/2021, you wrote:
Fred,
I didn't change anything and here are my results.
I think yours may have occurred due to an Internet hick-up at the Server side, not at all certain, but my connection worked as expected.
see:

*** Starting to call K0SI-10
*** Opening serial port COM3; 9600 baud; Kenwood TS-2000
*** Connecting to K0SI-10
*** Connected to K0SI-10 at 2021/11/26 14:49:50

[WL2K-5.0-B2FWIHJM$]
;PQ: 85882908
CMS via K0SI >
   ;FW: N0AXZ BCARES-EC|67353255
   [RMS Express-1.5.42.0-B2FHM$]

   ;PR: 61530211
   ; K0SI-10 DE N0AXZ (EM38TW)
   FF
FQ
*** --- End of session at 2021/11/26 14:50:07 ---
*** Messages sent: 0.  Total bytes sent: 0,  Time: 00:16,  bytes/minute: 0
*** Messages Received: 0.  Total bytes received: 0,  Total session time: 00:16,  bytes/minute: 0
*** Disconnected at 2021/11/26 14:50:15

*** Disconnect reported.

so you might try again when you have time..
73,
bill N0AXZ

On Fri, Nov 26, 2021 at 8:14 AM Fred Dittrich <fdittric@...> wrote:
Hi

Now it says:

*** Starting to call K0SI-10
*** Opening serial port COM3; 9600 baud; Kantronics
*** Connecting to K0SI-10
*** CONNECTED TO K0SI-10

[WL2K-5.0-B2FWIHJM$]
CMS via K0SI >
    ;FW: AE0FD
    [RMS Express-1.5.42.0-B2FHM$]

    ; K0SI-10 DE AE0FD (EM38UX)
    FF
*** [2] Login failed - no response to challenge - Disconnecting (63.239.57.158)
*** Disconnected at 2021/11/26 14:08:54

*** Disconnect reported.

73

Fred AE0FD








--
Bill N0AXZ