|
Locked
Sticky
K0SI DMR Repeater
2 messages
Hi Folks, I just wanted to let everyone know that we've updated a little information on the DMR repeater posting on our website. You can see that post here --> https://www.k0si.net/2018/07/dmr-repeate
Hi Folks, I just wanted to let everyone know that we've updated a little information on the DMR repeater posting on our website. You can see that post here --> https://www.k0si.net/2018/07/dmr-repeater/ Hopefully, it will answer all your questions but if not, please feel free to post here in the group so we can get you some help. Also, I wanted to take this opportunity to thank the following group of folks who were very helpful in getting all this accomplished (listed in no particular order): Chris - K0PHP Jake - NS0Y Ernest - KC0EZE Gary - W9TIG These are the guys who all pitched in to get the CMR repeater on the air and connected to the internet. Also, we would also like to express a special Thank You to iZones, LLC for donating the internet connection used for our DMR repeater! iZones, LLC 1301 Vandiver Dr., Suite K Columbia, MO 65202 573-4iZones (573/449-6637) www.izones.net
By
Don - KM0R
·
|
|
License testing tonight
4 messages
Jon I'll be there for testing tonight. 73 Fred AE0FD
|
Jon I'll be there for testing tonight. 73 Fred AE0FD
|
By
Fred Dittrich
·
|
|
FYI, EMP and CME protection for your QTH
6 messages
Hi Check this out: https://www.youtube.com/watch?v=bPSTFe1dBAg 3-steps to Whole-House EMP Protection 73 Fred AE0FD
|
Hi Check this out: https://www.youtube.com/watch?v=bPSTFe1dBAg 3-steps to Whole-House EMP Protection 73 Fred AE0FD
|
By
Fred Dittrich
·
|
|
CMRA Meeting Minutes
Thanks to Bob, N6VZO, for his speedy effort, I've posted the minutes from the March meeting the other evening at https://k0si.net/cmra-meeting-minutes/ . February's minutes have been slightly updated,
|
Thanks to Bob, N6VZO, for his speedy effort, I've posted the minutes from the March meeting the other evening at https://k0si.net/cmra-meeting-minutes/ . February's minutes have been slightly updated,
|
By
John W. Smith
·
|
|
K0SI-10 down
Group, I have made three trips to the ECC today thinking each time I have fixed the problem with K0SI-10, and its USB cable to TNC problem. It works for a while after my visit then loses it again. So
|
Group, I have made three trips to the ECC today thinking each time I have fixed the problem with K0SI-10, and its USB cable to TNC problem. It works for a while after my visit then loses it again. So
|
By
Bill McFarland - N0AXZ
·
|
|
LCTOTA sign ups
See list below for the participants that I have recorded. I may have left you out, or now you can't make it, so let me know if the list needs adjustments. We have plenty of time before the event (6/3-
|
See list below for the participants that I have recorded. I may have left you out, or now you can't make it, so let me know if the list needs adjustments. We have plenty of time before the event (6/3-
|
By
Bill McFarland - N0AXZ
·
|
|
Winlink Story - 2
2 messages
Winlink Story – Exercise Group of Winlink users: Have a little fun exercising your Winlink capabilities by participating in this month’s Winlink exercise. We (you) will help write a story by adding a
|
Winlink Story – Exercise Group of Winlink users: Have a little fun exercising your Winlink capabilities by participating in this month’s Winlink exercise. We (you) will help write a story by adding a
|
By
Bill McFarland - N0AXZ
·
|
|
K0SI-10 down?
3 messages
Hi It says: *** Starting to call K0SI-10 *** Opening serial port COM3; 9600 baud; Kantronics *** Connecting to K0SI-10 *** CONNECTED TO K0SI-10 *** Forced disconnect <==== This is me hitting the Stop
|
Hi It says: *** Starting to call K0SI-10 *** Opening serial port COM3; 9600 baud; Kantronics *** Connecting to K0SI-10 *** CONNECTED TO K0SI-10 *** Forced disconnect <==== This is me hitting the Stop
|
By
Fred Dittrich
·
|
|
Radio For Sale
Any new HAMs out there looking for a HF radio? I have an ICOM IC-718 with a MFJ-939 automatic tuner. Both about a year old, works great. Radio includes original hand mic, power cord, manual, and quick
|
Any new HAMs out there looking for a HF radio? I have an ICOM IC-718 with a MFJ-939 automatic tuner. Both about a year old, works great. Radio includes original hand mic, power cord, manual, and quick
|
By
Boback
·
|
|
Winlink Story
2 messages
Winlink Story – Exercise Group of Winlink users: Have a little fun exercising your Winlink capabilities by participating in this month’s Winlink exercise. We (you) will help write a story by adding a
|
Winlink Story – Exercise Group of Winlink users: Have a little fun exercising your Winlink capabilities by participating in this month’s Winlink exercise. We (you) will help write a story by adding a
|
By
Bill McFarland - N0AXZ
·
|
|
Nice technical doc on WW II arial radar
Hi See: https://www.youtube.com/watch?v=r-coUz1EbNo Airborne Radar in the Battle of the Atlantic 1940-1945. Enjoy 73 Fred AE0FD
|
Hi See: https://www.youtube.com/watch?v=r-coUz1EbNo Airborne Radar in the Battle of the Atlantic 1940-1945. Enjoy 73 Fred AE0FD
|
By
Fred Dittrich
·
|
|
Upcoming Virtual Events
Hi Upcoming virtual maker events, Wednesday, March 22 @ 7 PM ETD: “Makers & Hams”. See below. 73 Fred AE0FD ------------------------------------ ---------- Forwarded message --------- From: Make: <mak
|
Hi Upcoming virtual maker events, Wednesday, March 22 @ 7 PM ETD: “Makers & Hams”. See below. 73 Fred AE0FD ------------------------------------ ---------- Forwarded message --------- From: Make: <mak
|
By
Fred Dittrich
·
|
|
Crazy DX
For anyone who does not know there is a world wide context going on now and the DX is the best I have ever seen it on most bands. For the Techs 10 meters is blowing up with DX. 73 Paul KE0IKG Sent fro
|
For anyone who does not know there is a world wide context going on now and the DX is the best I have ever seen it on most bands. For the Techs 10 meters is blowing up with DX. 73 Paul KE0IKG Sent fro
|
By
paul watt
·
|
|
K0PHP-10 down?
Hi It says: *** Launching VARA FM TNC: C:\VARA FM\VaraFM.exe *** Successfully connected to VARA FM TNC. *** Ready *** Calling K0PHP-10 *** CONNECT AE0FD K0PHP-10 *** Failure connecting with K0PHP-10 7
|
Hi It says: *** Launching VARA FM TNC: C:\VARA FM\VaraFM.exe *** Successfully connected to VARA FM TNC. *** Ready *** Calling K0PHP-10 *** CONNECT AE0FD K0PHP-10 *** Failure connecting with K0PHP-10 7
|
By
Fred Dittrich
·
|
|
Ham Radio Operators, We Need Your Help During Solar Eclipses!
Hi See: https://science.nasa.gov/science-news/citizenscience/ham-radio-operators-we-need-your-help-during-solar-eclipses 73 Fred AE0FD
|
Hi See: https://science.nasa.gov/science-news/citizenscience/ham-radio-operators-we-need-your-help-during-solar-eclipses 73 Fred AE0FD
|
By
Fred Dittrich
·
|
|
License testing tonight
Jon I'll be there tonight. 73 Fred AE0FD
|
Jon I'll be there tonight. 73 Fred AE0FD
|
By
Fred Dittrich
·
|
|
February Meeting Minutes
Minutes from Tuesday evening's meeting are now available at https://k0si.net/cmra-meeting-minutes/ . Click on February for 2023 to view or download. 73, John, KC0HSB -- This message came to you from J
|
Minutes from Tuesday evening's meeting are now available at https://k0si.net/cmra-meeting-minutes/ . Click on February for 2023 to view or download. 73, John, KC0HSB -- This message came to you from J
|
By
John W. Smith
·
|
|
K0SI-10 down?
7 messages
Hi It says: *** Starting to call K0SI-10 *** Opening serial port COM3; 9600 baud; Kantronics *** Connecting to K0SI-10 *** CONNECTED TO K0SI-10 73 Fred AE0FD
|
Hi It says: *** Starting to call K0SI-10 *** Opening serial port COM3; 9600 baud; Kantronics *** Connecting to K0SI-10 *** CONNECTED TO K0SI-10 73 Fred AE0FD
|
By
Fred Dittrich
·
|
|
CERT
The Callaway club is looking for more people to register for an upcoming CERT class. Registration info is attached. 73, John, KC0HSB -------- Forwarded Message -------- Subject: Fwd: CERT Date: Tue, 7
|
The Callaway club is looking for more people to register for an upcoming CERT class. Registration info is attached. 73, John, KC0HSB -------- Forwarded Message -------- Subject: Fwd: CERT Date: Tue, 7
|
By
John W. Smith
·
|
|
3Y0J - Bouvet Island
2 messages
They are operating there now (Monday 12:30p) on 21.225. -ct kf0fzv
|
They are operating there now (Monday 12:30p) on 21.225. -ct kf0fzv
|
By
Charlie - KF0FZV
·
|
